Nomad's Lexus GX 460 - aka - Land Cruiser Prado 150

Full size roof rack mounted, a time consuming DIY My goals with this rack: DIY, full roof size, able to stand on, as low profile as possible, can connect to stock rails and be quickly removable.  The heavy duty cross bars I made work fine for hauling beach items and lumber from the 'Depot. I was planning on making a fairing to eliminate the little bit of wind noise and adding flat platform material to it. The larger issue I ran into was they were not long enough to support a full 8' sheet of material, leaving the front to bend down toward the roof, and the curve of the roof track made them uneven for a flat cover.  Reality is I felt the itch to do a project and weld more. I want a solid platform to mount items to that are odd shapes or heavier, like max tracks, an awning, or a spare 5 gallons of gas for offroad excursions in this thirsty truck.  But really, who doesn't want to look like they are on a safari, rolling curbs in the Target parking lot? After looking at severa...

Spend $1300 on wheels? Spend another $1200 on tires? No thanks. Not this guy... I tried the Rust-Oleum Metallic "Oil Rubbed Bronze" paint to see what it looks like. Figured I'd share what it looked like. It does a good job of looking like some of the other bronze wheels available but I actually preferred the satin black. OEM Sequoia wheels, poorly painted when I picked them up  After replacing my JK Wrangler with this  GX460  trying to make it more of what the "Land Cruiser Prado" was made to be in all other countries.  It looks ok from a distance but thick paint is sagging in areas. Yes, this has way better tech, a better engine, more comfortable interior, quieter more powerful engine, and more, that the Jeep JK didn't have, but it lacks in the looks department (and, as Jeepers say ad nauseum - no removable top or doors).  After chemical stripping. The aluminum surface is perfect So I want less "Latte Lounger", and more "Capable Cruiser"...

Do you prefer drawers or a flat cargo space? Leave a comment below. I revised the rear setup to give me more options and storage here: https://nomadsgx460.blogspot.com/2022/08/more-versatile-rear-storage-drawers-3rd.html I won't be using the 3rd row electric seats so I pulled them right away. 127lbs of associated seats and brackets gone! Heavier than I thought!  I also removed the large class IV hitch which was another 85lb or so. With 200lb less weight in the rear and 6 inches lower trunk floor I have something a little more useable and versatile.  In order to finish it all off I built a cargo floor with locking tie down points. I used much of what I had available and only bought what was necessary.  The silver you see is two layers of my favorite -budget- sound deadener which is "PEEL N SEAL" window seal. Look it up. It's only $20 for a roll of foil backed butyl. It deadens the resonance of the steel panels. Same as Dynamat. I used two layers as I heard some more ...

"I welded, it helded." I was thinking about  adding rock sliders. Not to hit rock gardens and pivot around obstacles or grind over boulders, but as a 'just in case" measure as even mild trails can reach up and grab those low hanging plastic steps the GX came with.  I had a few options: Several suppliers have bolt on designs for $600-1,000 Trail Gear DIY kits are around $350-400 Raw steel tube would cost $250 (still need to buy a bender) I researched and watched used markets for take offs... As I looked at used parts, I noticed how much cheaper the Jeep JK stuff was. DIY kits are basically sliders welded up but you do the fitment, mounting plates, and extensions. Weld it and finish it. Well, my catalog of poor ideas keeps growing... I had another one. I picked up a set of Smittybuilt rock sliders for the Jeep JKU (4 door) for $80 locally. Cheaper than I can buy the same amount of raw tube steel... Jeep sliders for the Lexus? Just my style. Stock sideskirts are 74...